Statistics
| Branch: | Revision:

ffmpeg / Doxyfile @ 900a129f

History | View | Annotate | Download (57.7 KB)

1
# Doxyfile 1.5.6
2

    
3
# This file describes the settings to be used by the documentation system
4
# doxygen (www.doxygen.org) for a project
5
#
6
# All text after a hash (#) is considered a comment and will be ignored
7
# The format is:
8
#       TAG = value [value, ...]
9
# For lists items can also be appended using:
10
#       TAG += value [value, ...]
11
# Values that contain spaces should be placed between quotes (" ")
12

    
13
#---------------------------------------------------------------------------
14
# Project related configuration options
15
#---------------------------------------------------------------------------
16

    
17
# This tag specifies the encoding used for all characters in the config file
18
# that follow. The default is UTF-8 which is also the encoding used for all
19
# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20
# iconv built into libc) for the transcoding. See
21
# http://www.gnu.org/software/libiconv for the list of possible encodings.
22

    
23
DOXYFILE_ENCODING      = UTF-8
24

    
25
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26
# by quotes) that should identify the project.
27

    
28
PROJECT_NAME           = Libav
29

    
30
# The PROJECT_NUMBER tag can be used to enter a project or revision number.
31
# This could be handy for archiving the generated documentation or
32
# if some version control system is used.
33

    
34
PROJECT_NUMBER         =
35

    
36
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37
# base path where the generated documentation will be put.
38
# If a relative path is entered, it will be relative to the location
39
# where doxygen was started. If left blank the current directory will be used.
40

    
41
OUTPUT_DIRECTORY       = doxy
42

    
43
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44
# 4096 sub-directories (in 2 levels) under the output directory of each output
45
# format and will distribute the generated files over these directories.
46
# Enabling this option can be useful when feeding doxygen a huge amount of
47
# source files, where putting all generated files in the same directory would
48
# otherwise cause performance problems for the file system.
49

    
50
CREATE_SUBDIRS         = NO
51

    
52
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
53
# documentation generated by doxygen is written. Doxygen will use this
54
# information to generate all constant output in the proper language.
55
# The default language is English, other supported languages are:
56
# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57
# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek,
58
# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages),
59
# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish,
60
# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish,
61
# and Ukrainian.
62

    
63
OUTPUT_LANGUAGE        = English
64

    
65
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
66
# include brief member descriptions after the members that are listed in
67
# the file and class documentation (similar to JavaDoc).
68
# Set to NO to disable this.
69

    
70
BRIEF_MEMBER_DESC      = YES
71

    
72
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
73
# the brief description of a member or function before the detailed description.
74
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
75
# brief descriptions will be completely suppressed.
76

    
77
REPEAT_BRIEF           = YES
78

    
79
# This tag implements a quasi-intelligent brief description abbreviator
80
# that is used to form the text in various listings. Each string
81
# in this list, if found as the leading text of the brief description, will be
82
# stripped from the text and the result after processing the whole list, is
83
# used as the annotated text. Otherwise, the brief description is used as-is.
84
# If left blank, the following values are used ("$name" is automatically
85
# replaced with the name of the entity): "The $name class" "The $name widget"
86
# "The $name file" "is" "provides" "specifies" "contains"
87
# "represents" "a" "an" "the"
88

    
89
ABBREVIATE_BRIEF       =
90

    
91
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
92
# Doxygen will generate a detailed section even if there is only a brief
93
# description.
94

    
95
ALWAYS_DETAILED_SEC    = NO
96

    
97
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
98
# inherited members of a class in the documentation of that class as if those
99
# members were ordinary class members. Constructors, destructors and assignment
100
# operators of the base classes will not be shown.
101

    
102
INLINE_INHERITED_MEMB  = NO
103

    
104
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
105
# path before files name in the file list and in the header files. If set
106
# to NO the shortest path that makes the file name unique will be used.
107

    
108
FULL_PATH_NAMES        = YES
109

    
110
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
111
# can be used to strip a user-defined part of the path. Stripping is
112
# only done if one of the specified strings matches the left-hand part of
113
# the path. The tag can be used to show relative paths in the file list.
114
# If left blank the directory from which doxygen is run is used as the
115
# path to strip.
116

    
117
STRIP_FROM_PATH        = .
118

    
119
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
120
# the path mentioned in the documentation of a class, which tells
121
# the reader which header file to include in order to use a class.
122
# If left blank only the name of the header file containing the class
123
# definition is used. Otherwise one should specify the include paths that
124
# are normally passed to the compiler using the -I flag.
125

    
126
STRIP_FROM_INC_PATH    =
127

    
128
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
129
# (but less readable) file names. This can be useful is your file systems
130
# doesn't support long names like on DOS, Mac, or CD-ROM.
131

    
132
SHORT_NAMES            = NO
133

    
134
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
135
# will interpret the first line (until the first dot) of a JavaDoc-style
136
# comment as the brief description. If set to NO, the JavaDoc
137
# comments will behave just like regular Qt-style comments
138
# (thus requiring an explicit @brief command for a brief description.)
139

    
140
JAVADOC_AUTOBRIEF      = YES
141

    
142
# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
143
# interpret the first line (until the first dot) of a Qt-style
144
# comment as the brief description. If set to NO, the comments
145
# will behave just like regular Qt-style comments (thus requiring
146
# an explicit \brief command for a brief description.)
147

    
148
QT_AUTOBRIEF           = NO
149

    
150
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
151
# treat a multi-line C++ special comment block (i.e. a block of //! or ///
152
# comments) as a brief description. This used to be the default behaviour.
153
# The new default is to treat a multi-line C++ comment block as a detailed
154
# description. Set this tag to YES if you prefer the old behaviour instead.
155

    
156
MULTILINE_CPP_IS_BRIEF = NO
157

    
158
# If the DETAILS_AT_TOP tag is set to YES then Doxygen
159
# will output the detailed description near the top, like JavaDoc.
160
# If set to NO, the detailed description appears after the member
161
# documentation.
162

    
163
DETAILS_AT_TOP         = NO
164

    
165
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
166
# member inherits the documentation from any documented member that it
167
# re-implements.
168

    
169
INHERIT_DOCS           = YES
170

    
171
# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
172
# a new page for each member. If set to NO, the documentation of a member will
173
# be part of the file/class/namespace that contains it.
174

    
175
SEPARATE_MEMBER_PAGES  = NO
176

    
177
# The TAB_SIZE tag can be used to set the number of spaces in a tab.
178
# Doxygen uses this value to replace tabs by spaces in code fragments.
179

    
180
TAB_SIZE               = 8
181

    
182
# This tag can be used to specify a number of aliases that acts
183
# as commands in the documentation. An alias has the form "name=value".
184
# For example adding "sideeffect=\par Side Effects:\n" will allow you to
185
# put the command \sideeffect (or @sideeffect) in the documentation, which
186
# will result in a user-defined paragraph with heading "Side Effects:".
187
# You can put \n's in the value part of an alias to insert newlines.
188

    
189
ALIASES                =
190

    
191
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
192
# sources only. Doxygen will then generate output that is more tailored for C.
193
# For instance, some of the names that are used will be different. The list
194
# of all members will be omitted, etc.
195

    
196
OPTIMIZE_OUTPUT_FOR_C  = YES
197

    
198
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
199
# sources only. Doxygen will then generate output that is more tailored for
200
# Java. For instance, namespaces will be presented as packages, qualified
201
# scopes will look different, etc.
202

    
203
OPTIMIZE_OUTPUT_JAVA   = NO
204

    
205
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
206
# sources only. Doxygen will then generate output that is more tailored for
207
# Fortran.
208

    
209
OPTIMIZE_FOR_FORTRAN   = NO
210

    
211
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
212
# sources. Doxygen will then generate output that is tailored for
213
# VHDL.
214

    
215
OPTIMIZE_OUTPUT_VHDL   = NO
216

    
217
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
218
# to include (a tag file for) the STL sources as input, then you should
219
# set this tag to YES in order to let doxygen match functions declarations and
220
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
221
# func(std::string) {}). This also make the inheritance and collaboration
222
# diagrams that involve STL classes more complete and accurate.
223

    
224
BUILTIN_STL_SUPPORT    = NO
225

    
226
# If you use Microsoft's C++/CLI language, you should set this option to YES to
227
# enable parsing support.
228

    
229
CPP_CLI_SUPPORT        = NO
230

    
231
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
232
# Doxygen will parse them like normal C++ but will assume all classes use public
233
# instead of private inheritance when no explicit protection keyword is present.
234

    
235
SIP_SUPPORT            = NO
236

    
237
# For Microsoft's IDL there are propget and propput attributes to indicate getter
238
# and setter methods for a property. Setting this option to YES (the default)
239
# will make doxygen to replace the get and set methods by a property in the
240
# documentation. This will only work if the methods are indeed getting or
241
# setting a simple type. If this is not the case, or you want to show the
242
# methods anyway, you should set this option to NO.
243

    
244
IDL_PROPERTY_SUPPORT   = YES
245

    
246
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
247
# tag is set to YES, then doxygen will reuse the documentation of the first
248
# member in the group (if any) for the other members of the group. By default
249
# all members of a group must be documented explicitly.
250

    
251
DISTRIBUTE_GROUP_DOC   = NO
252

    
253
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
254
# the same type (for instance a group of public functions) to be put as a
255
# subgroup of that type (e.g. under the Public Functions section). Set it to
256
# NO to prevent subgrouping. Alternatively, this can be done per class using
257
# the \nosubgrouping command.
258

    
259
SUBGROUPING            = YES
260

    
261
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
262
# is documented as struct, union, or enum with the name of the typedef. So
263
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
264
# with name TypeT. When disabled the typedef will appear as a member of a file,
265
# namespace, or class. And the struct will be named TypeS. This can typically
266
# be useful for C code in case the coding convention dictates that all compound
267
# types are typedef'ed and only the typedef is referenced, never the tag name.
268

    
269
TYPEDEF_HIDES_STRUCT   = NO
270

    
271
#---------------------------------------------------------------------------
272
# Build related configuration options
273
#---------------------------------------------------------------------------
274

    
275
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
276
# documentation are documented, even if no documentation was available.
277
# Private class members and static file members will be hidden unless
278
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
279

    
280
EXTRACT_ALL            = YES
281

    
282
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
283
# will be included in the documentation.
284

    
285
EXTRACT_PRIVATE        = YES
286

    
287
# If the EXTRACT_STATIC tag is set to YES all static members of a file
288
# will be included in the documentation.
289

    
290
EXTRACT_STATIC         = YES
291

    
292
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
293
# defined locally in source files will be included in the documentation.
294
# If set to NO only classes defined in header files are included.
295

    
296
EXTRACT_LOCAL_CLASSES  = YES
297

    
298
# This flag is only useful for Objective-C code. When set to YES local
299
# methods, which are defined in the implementation section but not in
300
# the interface are included in the documentation.
301
# If set to NO (the default) only methods in the interface are included.
302

    
303
EXTRACT_LOCAL_METHODS  = NO
304

    
305
# If this flag is set to YES, the members of anonymous namespaces will be
306
# extracted and appear in the documentation as a namespace called
307
# 'anonymous_namespace{file}', where file will be replaced with the base
308
# name of the file that contains the anonymous namespace. By default
309
# anonymous namespace are hidden.
310

    
311
EXTRACT_ANON_NSPACES   = NO
312

    
313
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
314
# undocumented members of documented classes, files or namespaces.
315
# If set to NO (the default) these members will be included in the
316
# various overviews, but no documentation section is generated.
317
# This option has no effect if EXTRACT_ALL is enabled.
318

    
319
HIDE_UNDOC_MEMBERS     = NO
320

    
321
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
322
# undocumented classes that are normally visible in the class hierarchy.
323
# If set to NO (the default) these classes will be included in the various
324
# overviews. This option has no effect if EXTRACT_ALL is enabled.
325

    
326
HIDE_UNDOC_CLASSES     = NO
327

    
328
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
329
# friend (class|struct|union) declarations.
330
# If set to NO (the default) these declarations will be included in the
331
# documentation.
332

    
333
HIDE_FRIEND_COMPOUNDS  = NO
334

    
335
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
336
# documentation blocks found inside the body of a function.
337
# If set to NO (the default) these blocks will be appended to the
338
# function's detailed documentation block.
339

    
340
HIDE_IN_BODY_DOCS      = NO
341

    
342
# The INTERNAL_DOCS tag determines if documentation
343
# that is typed after a \internal command is included. If the tag is set
344
# to NO (the default) then the documentation will be excluded.
345
# Set it to YES to include the internal documentation.
346

    
347
INTERNAL_DOCS          = NO
348

    
349
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
350
# file names in lower-case letters. If set to YES upper-case letters are also
351
# allowed. This is useful if you have classes or files whose names only differ
352
# in case and if your file system supports case sensitive file names. Windows
353
# and Mac users are advised to set this option to NO.
354

    
355
CASE_SENSE_NAMES       = YES
356

    
357
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
358
# will show members with their full class and namespace scopes in the
359
# documentation. If set to YES the scope will be hidden.
360

    
361
HIDE_SCOPE_NAMES       = NO
362

    
363
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
364
# will put a list of the files that are included by a file in the documentation
365
# of that file.
366

    
367
SHOW_INCLUDE_FILES     = YES
368

    
369
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
370
# is inserted in the documentation for inline members.
371

    
372
INLINE_INFO            = YES
373

    
374
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
375
# will sort the (detailed) documentation of file and class members
376
# alphabetically by member name. If set to NO the members will appear in
377
# declaration order.
378

    
379
SORT_MEMBER_DOCS       = YES
380

    
381
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
382
# brief documentation of file, namespace and class members alphabetically
383
# by member name. If set to NO (the default) the members will appear in
384
# declaration order.
385

    
386
SORT_BRIEF_DOCS        = NO
387

    
388
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
389
# hierarchy of group names into alphabetical order. If set to NO (the default)
390
# the group names will appear in their defined order.
391

    
392
SORT_GROUP_NAMES       = NO
393

    
394
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
395
# sorted by fully-qualified names, including namespaces. If set to
396
# NO (the default), the class list will be sorted only by class name,
397
# not including the namespace part.
398
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
399
# Note: This option applies only to the class list, not to the
400
# alphabetical list.
401

    
402
SORT_BY_SCOPE_NAME     = NO
403

    
404
# The GENERATE_TODOLIST tag can be used to enable (YES) or
405
# disable (NO) the todo list. This list is created by putting \todo
406
# commands in the documentation.
407

    
408
GENERATE_TODOLIST      = YES
409

    
410
# The GENERATE_TESTLIST tag can be used to enable (YES) or
411
# disable (NO) the test list. This list is created by putting \test
412
# commands in the documentation.
413

    
414
GENERATE_TESTLIST      = YES
415

    
416
# The GENERATE_BUGLIST tag can be used to enable (YES) or
417
# disable (NO) the bug list. This list is created by putting \bug
418
# commands in the documentation.
419

    
420
GENERATE_BUGLIST       = YES
421

    
422
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
423
# disable (NO) the deprecated list. This list is created by putting
424
# \deprecated commands in the documentation.
425

    
426
GENERATE_DEPRECATEDLIST= YES
427

    
428
# The ENABLED_SECTIONS tag can be used to enable conditional
429
# documentation sections, marked by \if sectionname ... \endif.
430

    
431
ENABLED_SECTIONS       =
432

    
433
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
434
# the initial value of a variable or define consists of for it to appear in
435
# the documentation. If the initializer consists of more lines than specified
436
# here it will be hidden. Use a value of 0 to hide initializers completely.
437
# The appearance of the initializer of individual variables and defines in the
438
# documentation can be controlled using \showinitializer or \hideinitializer
439
# command in the documentation regardless of this setting.
440

    
441
MAX_INITIALIZER_LINES  = 30
442

    
443
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
444
# at the bottom of the documentation of classes and structs. If set to YES the
445
# list will mention the files that were used to generate the documentation.
446

    
447
SHOW_USED_FILES        = YES
448

    
449
# If the sources in your project are distributed over multiple directories
450
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
451
# in the documentation. The default is NO.
452

    
453
SHOW_DIRECTORIES       = NO
454

    
455
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
456
# This will remove the Files entry from the Quick Index and from the
457
# Folder Tree View (if specified). The default is YES.
458

    
459
SHOW_FILES             = YES
460

    
461
# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
462
# Namespaces page.  This will remove the Namespaces entry from the Quick Index
463
# and from the Folder Tree View (if specified). The default is YES.
464

    
465
SHOW_NAMESPACES        = YES
466

    
467
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
468
# doxygen should invoke to get the current version for each file (typically from
469
# the version control system). Doxygen will invoke the program by executing (via
470
# popen()) the command <command> <input-file>, where <command> is the value of
471
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
472
# provided by doxygen. Whatever the program writes to standard output
473
# is used as the file version. See the manual for examples.
474

    
475
FILE_VERSION_FILTER    =
476

    
477
#---------------------------------------------------------------------------
478
# configuration options related to warning and progress messages
479
#---------------------------------------------------------------------------
480

    
481
# The QUIET tag can be used to turn on/off the messages that are generated
482
# by doxygen. Possible values are YES and NO. If left blank NO is used.
483

    
484
QUIET                  = YES
485

    
486
# The WARNINGS tag can be used to turn on/off the warning messages that are
487
# generated by doxygen. Possible values are YES and NO. If left blank
488
# NO is used.
489

    
490
WARNINGS               = YES
491

    
492
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
493
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
494
# automatically be disabled.
495

    
496
WARN_IF_UNDOCUMENTED   = YES
497

    
498
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
499
# potential errors in the documentation, such as not documenting some
500
# parameters in a documented function, or documenting parameters that
501
# don't exist or using markup commands wrongly.
502

    
503
WARN_IF_DOC_ERROR      = YES
504

    
505
# This WARN_NO_PARAMDOC option can be abled to get warnings for
506
# functions that are documented, but have no documentation for their parameters
507
# or return value. If set to NO (the default) doxygen will only warn about
508
# wrong or incomplete parameter documentation, but not about the absence of
509
# documentation.
510

    
511
WARN_NO_PARAMDOC       = NO
512

    
513
# The WARN_FORMAT tag determines the format of the warning messages that
514
# doxygen can produce. The string should contain the $file, $line, and $text
515
# tags, which will be replaced by the file and line number from which the
516
# warning originated and the warning text. Optionally the format may contain
517
# $version, which will be replaced by the version of the file (if it could
518
# be obtained via FILE_VERSION_FILTER)
519

    
520
WARN_FORMAT            = "$file:$line: $text"
521

    
522
# The WARN_LOGFILE tag can be used to specify a file to which warning
523
# and error messages should be written. If left blank the output is written
524
# to stderr.
525

    
526
WARN_LOGFILE           =
527

    
528
#---------------------------------------------------------------------------
529
# configuration options related to the input files
530
#---------------------------------------------------------------------------
531

    
532
# The INPUT tag can be used to specify the files and/or directories that contain
533
# documented source files. You may enter file names like "myfile.cpp" or
534
# directories like "/usr/src/myproject". Separate the files or directories
535
# with spaces.
536

    
537
INPUT                  =
538

    
539
# This tag can be used to specify the character encoding of the source files
540
# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
541
# also the default input encoding. Doxygen uses libiconv (or the iconv built
542
# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
543
# the list of possible encodings.
544

    
545
INPUT_ENCODING         = UTF-8
546

    
547
# If the value of the INPUT tag contains directories, you can use the
548
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
549
# and *.h) to filter out the source-files in the directories. If left
550
# blank the following patterns are tested:
551
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
552
# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
553

    
554
FILE_PATTERNS          =
555

    
556
# The RECURSIVE tag can be used to turn specify whether or not subdirectories
557
# should be searched for input files as well. Possible values are YES and NO.
558
# If left blank NO is used.
559

    
560
RECURSIVE              = YES
561

    
562
# The EXCLUDE tag can be used to specify files and/or directories that should
563
# excluded from the INPUT source files. This way you can easily exclude a
564
# subdirectory from a directory tree whose root is specified with the INPUT tag.
565

    
566
EXCLUDE                =
567

    
568
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
569
# directories that are symbolic links (a Unix filesystem feature) are excluded
570
# from the input.
571

    
572
EXCLUDE_SYMLINKS       = NO
573

    
574
# If the value of the INPUT tag contains directories, you can use the
575
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
576
# certain files from those directories. Note that the wildcards are matched
577
# against the file with absolute path, so to exclude all test directories
578
# for example use the pattern */test/*
579

    
580
EXCLUDE_PATTERNS       = *.git *.d
581

    
582
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
583
# (namespaces, classes, functions, etc.) that should be excluded from the
584
# output. The symbol name can be a fully qualified name, a word, or if the
585
# wildcard * is used, a substring. Examples: ANamespace, AClass,
586
# AClass::ANamespace, ANamespace::*Test
587

    
588
EXCLUDE_SYMBOLS        =
589

    
590
# The EXAMPLE_PATH tag can be used to specify one or more files or
591
# directories that contain example code fragments that are included (see
592
# the \include command).
593

    
594
EXAMPLE_PATH           =
595

    
596
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
597
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
598
# and *.h) to filter out the source-files in the directories. If left
599
# blank all files are included.
600

    
601
EXAMPLE_PATTERNS       =
602

    
603
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
604
# searched for input files to be used with the \include or \dontinclude
605
# commands irrespective of the value of the RECURSIVE tag.
606
# Possible values are YES and NO. If left blank NO is used.
607

    
608
EXAMPLE_RECURSIVE      = NO
609

    
610
# The IMAGE_PATH tag can be used to specify one or more files or
611
# directories that contain image that are included in the documentation (see
612
# the \image command).
613

    
614
IMAGE_PATH             =
615

    
616
# The INPUT_FILTER tag can be used to specify a program that doxygen should
617
# invoke to filter for each input file. Doxygen will invoke the filter program
618
# by executing (via popen()) the command <filter> <input-file>, where <filter>
619
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
620
# input file. Doxygen will then use the output that the filter program writes
621
# to standard output.  If FILTER_PATTERNS is specified, this tag will be
622
# ignored.
623

    
624
INPUT_FILTER           =
625

    
626
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
627
# basis.  Doxygen will compare the file name with each pattern and apply the
628
# filter if there is a match.  The filters are a list of the form:
629
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
630
# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
631
# is applied to all files.
632

    
633
FILTER_PATTERNS        =
634

    
635
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
636
# INPUT_FILTER) will be used to filter the input files when producing source
637
# files to browse (i.e. when SOURCE_BROWSER is set to YES).
638

    
639
FILTER_SOURCE_FILES    = NO
640

    
641
#---------------------------------------------------------------------------
642
# configuration options related to source browsing
643
#---------------------------------------------------------------------------
644

    
645
# If the SOURCE_BROWSER tag is set to YES then a list of source files will
646
# be generated. Documented entities will be cross-referenced with these sources.
647
# Note: To get rid of all source code in the generated output, make sure also
648
# VERBATIM_HEADERS is set to NO.
649

    
650
SOURCE_BROWSER         = YES
651

    
652
# Setting the INLINE_SOURCES tag to YES will include the body
653
# of functions and classes directly in the documentation.
654

    
655
INLINE_SOURCES         = NO
656

    
657
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
658
# doxygen to hide any special comment blocks from generated source code
659
# fragments. Normal C and C++ comments will always remain visible.
660

    
661
STRIP_CODE_COMMENTS    = YES
662

    
663
# If the REFERENCED_BY_RELATION tag is set to YES
664
# then for each documented function all documented
665
# functions referencing it will be listed.
666

    
667
REFERENCED_BY_RELATION = YES
668

    
669
# If the REFERENCES_RELATION tag is set to YES
670
# then for each documented function all documented entities
671
# called/used by that function will be listed.
672

    
673
REFERENCES_RELATION    = NO
674

    
675
# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
676
# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
677
# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
678
# link to the source code.  Otherwise they will link to the documentstion.
679

    
680
REFERENCES_LINK_SOURCE = YES
681

    
682
# If the USE_HTAGS tag is set to YES then the references to source code
683
# will point to the HTML generated by the htags(1) tool instead of doxygen
684
# built-in source browser. The htags tool is part of GNU's global source
685
# tagging system (see http://www.gnu.org/software/global/global.html). You
686
# will need version 4.8.6 or higher.
687

    
688
USE_HTAGS              = NO
689

    
690
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
691
# will generate a verbatim copy of the header file for each class for
692
# which an include is specified. Set to NO to disable this.
693

    
694
VERBATIM_HEADERS       = YES
695

    
696
#---------------------------------------------------------------------------
697
# configuration options related to the alphabetical class index
698
#---------------------------------------------------------------------------
699

    
700
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
701
# of all compounds will be generated. Enable this if the project
702
# contains a lot of classes, structs, unions or interfaces.
703

    
704
ALPHABETICAL_INDEX     = YES
705

    
706
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
707
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
708
# in which this list will be split (can be a number in the range [1..20])
709

    
710
COLS_IN_ALPHA_INDEX    = 5
711

    
712
# In case all classes in a project start with a common prefix, all
713
# classes will be put under the same header in the alphabetical index.
714
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
715
# should be ignored while generating the index headers.
716

    
717
IGNORE_PREFIX          =
718

    
719
#---------------------------------------------------------------------------
720
# configuration options related to the HTML output
721
#---------------------------------------------------------------------------
722

    
723
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
724
# generate HTML output.
725

    
726
GENERATE_HTML          = YES
727

    
728
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
729
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
730
# put in front of it. If left blank `html' will be used as the default path.
731

    
732
HTML_OUTPUT            = html
733

    
734
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
735
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
736
# doxygen will generate files with .html extension.
737

    
738
HTML_FILE_EXTENSION    = .html
739

    
740
# The HTML_HEADER tag can be used to specify a personal HTML header for
741
# each generated HTML page. If it is left blank doxygen will generate a
742
# standard header.
743

    
744
HTML_HEADER            =
745

    
746
# The HTML_FOOTER tag can be used to specify a personal HTML footer for
747
# each generated HTML page. If it is left blank doxygen will generate a
748
# standard footer.
749

    
750
HTML_FOOTER            =
751

    
752
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
753
# style sheet that is used by each HTML page. It can be used to
754
# fine-tune the look of the HTML output. If the tag is left blank doxygen
755
# will generate a default style sheet. Note that doxygen will try to copy
756
# the style sheet file to the HTML output directory, so don't put your own
757
# stylesheet in the HTML output directory as well, or it will be erased!
758

    
759
HTML_STYLESHEET        =
760

    
761
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
762
# files or namespaces will be aligned in HTML using tables. If set to
763
# NO a bullet list will be used.
764

    
765
HTML_ALIGN_MEMBERS     = YES
766

    
767
# If the GENERATE_HTMLHELP tag is set to YES, additional index files
768
# will be generated that can be used as input for tools like the
769
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
770
# of the generated HTML documentation.
771

    
772
GENERATE_HTMLHELP      = NO
773

    
774
# If the GENERATE_DOCSET tag is set to YES, additional index files
775
# will be generated that can be used as input for Apple's Xcode 3
776
# integrated development environment, introduced with OSX 10.5 (Leopard).
777
# To create a documentation set, doxygen will generate a Makefile in the
778
# HTML output directory. Running make will produce the docset in that
779
# directory and running "make install" will install the docset in
780
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
781
# it at startup.
782

    
783
GENERATE_DOCSET        = NO
784

    
785
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
786
# feed. A documentation feed provides an umbrella under which multiple
787
# documentation sets from a single provider (such as a company or product suite)
788
# can be grouped.
789

    
790
DOCSET_FEEDNAME        = "Doxygen generated docs"
791

    
792
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
793
# should uniquely identify the documentation set bundle. This should be a
794
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
795
# will append .docset to the name.
796

    
797
DOCSET_BUNDLE_ID       = org.doxygen.Project
798

    
799
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
800
# documentation will contain sections that can be hidden and shown after the
801
# page has loaded. For this to work a browser that supports
802
# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
803
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
804

    
805
HTML_DYNAMIC_SECTIONS  = NO
806

    
807
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
808
# be used to specify the file name of the resulting .chm file. You
809
# can add a path in front of the file if the result should not be
810
# written to the html output directory.
811

    
812
CHM_FILE               =
813

    
814
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
815
# be used to specify the location (absolute path including file name) of
816
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
817
# the HTML help compiler on the generated index.hhp.
818

    
819
HHC_LOCATION           =
820

    
821
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
822
# controls if a separate .chi index file is generated (YES) or that
823
# it should be included in the master .chm file (NO).
824

    
825
GENERATE_CHI           = NO
826

    
827
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
828
# is used to encode HtmlHelp index (hhk), content (hhc) and project file
829
# content.
830

    
831
CHM_INDEX_ENCODING     =
832

    
833
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
834
# controls whether a binary table of contents is generated (YES) or a
835
# normal table of contents (NO) in the .chm file.
836

    
837
BINARY_TOC             = NO
838

    
839
# The TOC_EXPAND flag can be set to YES to add extra items for group members
840
# to the contents of the HTML help documentation and to the tree view.
841

    
842
TOC_EXPAND             = NO
843

    
844
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
845
# top of each HTML page. The value NO (the default) enables the index and
846
# the value YES disables it.
847

    
848
DISABLE_INDEX          = NO
849

    
850
# This tag can be used to set the number of enum values (range [1..20])
851
# that doxygen will group on one line in the generated HTML documentation.
852

    
853
ENUM_VALUES_PER_LINE   = 4
854

    
855
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
856
# structure should be generated to display hierarchical information.
857
# If the tag value is set to FRAME, a side panel will be generated
858
# containing a tree-like index structure (just like the one that
859
# is generated for HTML Help). For this to work a browser that supports
860
# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
861
# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
862
# probably better off using the HTML help feature. Other possible values
863
# for this tag are: HIERARCHIES, which will generate the Groups, Directories,
864
# and Class Hiererachy pages using a tree view instead of an ordered list;
865
# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which
866
# disables this behavior completely. For backwards compatibility with previous
867
# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE
868
# respectively.
869

    
870
GENERATE_TREEVIEW      = NO
871

    
872
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
873
# used to set the initial width (in pixels) of the frame in which the tree
874
# is shown.
875

    
876
TREEVIEW_WIDTH         = 250
877

    
878
# Use this tag to change the font size of Latex formulas included
879
# as images in the HTML documentation. The default is 10. Note that
880
# when you change the font size after a successful doxygen run you need
881
# to manually remove any form_*.png images from the HTML output directory
882
# to force them to be regenerated.
883

    
884
FORMULA_FONTSIZE       = 10
885

    
886
#---------------------------------------------------------------------------
887
# configuration options related to the LaTeX output
888
#---------------------------------------------------------------------------
889

    
890
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
891
# generate Latex output.
892

    
893
GENERATE_LATEX         = NO
894

    
895
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
896
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
897
# put in front of it. If left blank `latex' will be used as the default path.
898

    
899
LATEX_OUTPUT           = latex
900

    
901
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
902
# invoked. If left blank `latex' will be used as the default command name.
903

    
904
LATEX_CMD_NAME         = latex
905

    
906
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
907
# generate index for LaTeX. If left blank `makeindex' will be used as the
908
# default command name.
909

    
910
MAKEINDEX_CMD_NAME     = makeindex
911

    
912
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
913
# LaTeX documents. This may be useful for small projects and may help to
914
# save some trees in general.
915

    
916
COMPACT_LATEX          = NO
917

    
918
# The PAPER_TYPE tag can be used to set the paper type that is used
919
# by the printer. Possible values are: a4, a4wide, letter, legal and
920
# executive. If left blank a4wide will be used.
921

    
922
PAPER_TYPE             = a4wide
923

    
924
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
925
# packages that should be included in the LaTeX output.
926

    
927
EXTRA_PACKAGES         =
928

    
929
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
930
# the generated latex document. The header should contain everything until
931
# the first chapter. If it is left blank doxygen will generate a
932
# standard header. Notice: only use this tag if you know what you are doing!
933

    
934
LATEX_HEADER           =
935

    
936
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
937
# is prepared for conversion to pdf (using ps2pdf). The pdf file will
938
# contain links (just like the HTML output) instead of page references
939
# This makes the output suitable for online browsing using a pdf viewer.
940

    
941
PDF_HYPERLINKS         = NO
942

    
943
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
944
# plain latex in the generated Makefile. Set this option to YES to get a
945
# higher quality PDF documentation.
946

    
947
USE_PDFLATEX           = NO
948

    
949
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
950
# command to the generated LaTeX files. This will instruct LaTeX to keep
951
# running if errors occur, instead of asking the user for help.
952
# This option is also used when generating formulas in HTML.
953

    
954
LATEX_BATCHMODE        = NO
955

    
956
# If LATEX_HIDE_INDICES is set to YES then doxygen will not
957
# include the index chapters (such as File Index, Compound Index, etc.)
958
# in the output.
959

    
960
LATEX_HIDE_INDICES     = NO
961

    
962
#---------------------------------------------------------------------------
963
# configuration options related to the RTF output
964
#---------------------------------------------------------------------------
965

    
966
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
967
# The RTF output is optimized for Word 97 and may not look very pretty with
968
# other RTF readers or editors.
969

    
970
GENERATE_RTF           = NO
971

    
972
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
973
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
974
# put in front of it. If left blank `rtf' will be used as the default path.
975

    
976
RTF_OUTPUT             = rtf
977

    
978
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
979
# RTF documents. This may be useful for small projects and may help to
980
# save some trees in general.
981

    
982
COMPACT_RTF            = NO
983

    
984
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
985
# will contain hyperlink fields. The RTF file will
986
# contain links (just like the HTML output) instead of page references.
987
# This makes the output suitable for online browsing using WORD or other
988
# programs which support those fields.
989
# Note: wordpad (write) and others do not support links.
990

    
991
RTF_HYPERLINKS         = NO
992

    
993
# Load stylesheet definitions from file. Syntax is similar to doxygen's
994
# config file, i.e. a series of assignments. You only have to provide
995
# replacements, missing definitions are set to their default value.
996

    
997
RTF_STYLESHEET_FILE    =
998

    
999
# Set optional variables used in the generation of an rtf document.
1000
# Syntax is similar to doxygen's config file.
1001

    
1002
RTF_EXTENSIONS_FILE    =
1003

    
1004
#---------------------------------------------------------------------------
1005
# configuration options related to the man page output
1006
#---------------------------------------------------------------------------
1007

    
1008
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1009
# generate man pages
1010

    
1011
GENERATE_MAN           = NO
1012

    
1013
# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1014
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1015
# put in front of it. If left blank `man' will be used as the default path.
1016

    
1017
MAN_OUTPUT             = man
1018

    
1019
# The MAN_EXTENSION tag determines the extension that is added to
1020
# the generated man pages (default is the subroutine's section .3)
1021

    
1022
MAN_EXTENSION          = .3
1023

    
1024
# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1025
# then it will generate one additional man file for each entity
1026
# documented in the real man page(s). These additional files
1027
# only source the real man page, but without them the man command
1028
# would be unable to find the correct page. The default is NO.
1029

    
1030
MAN_LINKS              = NO
1031

    
1032
#---------------------------------------------------------------------------
1033
# configuration options related to the XML output
1034
#---------------------------------------------------------------------------
1035

    
1036
# If the GENERATE_XML tag is set to YES Doxygen will
1037
# generate an XML file that captures the structure of
1038
# the code including all documentation.
1039

    
1040
GENERATE_XML           = NO
1041

    
1042
# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1043
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1044
# put in front of it. If left blank `xml' will be used as the default path.
1045

    
1046
XML_OUTPUT             = xml
1047

    
1048
# The XML_SCHEMA tag can be used to specify an XML schema,
1049
# which can be used by a validating XML parser to check the
1050
# syntax of the XML files.
1051

    
1052
XML_SCHEMA             =
1053

    
1054
# The XML_DTD tag can be used to specify an XML DTD,
1055
# which can be used by a validating XML parser to check the
1056
# syntax of the XML files.
1057

    
1058
XML_DTD                =
1059

    
1060
# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1061
# dump the program listings (including syntax highlighting
1062
# and cross-referencing information) to the XML output. Note that
1063
# enabling this will significantly increase the size of the XML output.
1064

    
1065
XML_PROGRAMLISTING     = YES
1066

    
1067
#---------------------------------------------------------------------------
1068
# configuration options for the AutoGen Definitions output
1069
#---------------------------------------------------------------------------
1070

    
1071
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1072
# generate an AutoGen Definitions (see autogen.sf.net) file
1073
# that captures the structure of the code including all
1074
# documentation. Note that this feature is still experimental
1075
# and incomplete at the moment.
1076

    
1077
GENERATE_AUTOGEN_DEF   = NO
1078

    
1079
#---------------------------------------------------------------------------
1080
# configuration options related to the Perl module output
1081
#---------------------------------------------------------------------------
1082

    
1083
# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1084
# generate a Perl module file that captures the structure of
1085
# the code including all documentation. Note that this
1086
# feature is still experimental and incomplete at the
1087
# moment.
1088

    
1089
GENERATE_PERLMOD       = NO
1090

    
1091
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1092
# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1093
# to generate PDF and DVI output from the Perl module output.
1094

    
1095
PERLMOD_LATEX          = NO
1096

    
1097
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1098
# nicely formatted so it can be parsed by a human reader.  This is useful
1099
# if you want to understand what is going on.  On the other hand, if this
1100
# tag is set to NO the size of the Perl module output will be much smaller
1101
# and Perl will parse it just the same.
1102

    
1103
PERLMOD_PRETTY         = YES
1104

    
1105
# The names of the make variables in the generated doxyrules.make file
1106
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1107
# This is useful so different doxyrules.make files included by the same
1108
# Makefile don't overwrite each other's variables.
1109

    
1110
PERLMOD_MAKEVAR_PREFIX =
1111

    
1112
#---------------------------------------------------------------------------
1113
# Configuration options related to the preprocessor
1114
#---------------------------------------------------------------------------
1115

    
1116
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1117
# evaluate all C-preprocessor directives found in the sources and include
1118
# files.
1119

    
1120
ENABLE_PREPROCESSING   = YES
1121

    
1122
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1123
# names in the source code. If set to NO (the default) only conditional
1124
# compilation will be performed. Macro expansion can be done in a controlled
1125
# way by setting EXPAND_ONLY_PREDEF to YES.
1126

    
1127
MACRO_EXPANSION        = YES
1128

    
1129
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1130
# then the macro expansion is limited to the macros specified with the
1131
# PREDEFINED and EXPAND_AS_DEFINED tags.
1132

    
1133
EXPAND_ONLY_PREDEF     = YES
1134

    
1135
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1136
# in the INCLUDE_PATH (see below) will be search if a #include is found.
1137

    
1138
SEARCH_INCLUDES        = YES
1139

    
1140
# The INCLUDE_PATH tag can be used to specify one or more directories that
1141
# contain include files that are not input files but should be processed by
1142
# the preprocessor.
1143

    
1144
INCLUDE_PATH           =
1145

    
1146
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1147
# patterns (like *.h and *.hpp) to filter out the header-files in the
1148
# directories. If left blank, the patterns specified with FILE_PATTERNS will
1149
# be used.
1150

    
1151
INCLUDE_FILE_PATTERNS  =
1152

    
1153
# The PREDEFINED tag can be used to specify one or more macro names that
1154
# are defined before the preprocessor is started (similar to the -D option of
1155
# gcc). The argument of the tag is a list of macros of the form: name
1156
# or name=definition (no spaces). If the definition and the = are
1157
# omitted =1 is assumed. To prevent a macro definition from being
1158
# undefined via #undef or recursively expanded use the := operator
1159
# instead of the = operator.
1160

    
1161
PREDEFINED             = __attribute__(x)="" "RENAME(x)=x ## _TMPL" "DEF(x)=x ## _TMPL" \
1162
                         HAVE_AV_CONFIG_H HAVE_MMX HAVE_MMX2 HAVE_AMD3DNOW \
1163

    
1164
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1165
# this tag can be used to specify a list of macro names that should be expanded.
1166
# The macro definition that is found in the sources will be used.
1167
# Use the PREDEFINED tag if you want to use a different macro definition.
1168

    
1169
#EXPAND_AS_DEFINED      = FF_COMMON_FRAME
1170
EXPAND_AS_DEFINED      = declare_idct(idct, table, idct_row_head, idct_row, idct_row_tail, idct_row_mid)
1171

    
1172
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1173
# doxygen's preprocessor will remove all function-like macros that are alone
1174
# on a line, have an all uppercase name, and do not end with a semicolon. Such
1175
# function macros are typically used for boiler-plate code, and will confuse
1176
# the parser if not removed.
1177

    
1178
SKIP_FUNCTION_MACROS   = YES
1179

    
1180
#---------------------------------------------------------------------------
1181
# Configuration::additions related to external references
1182
#---------------------------------------------------------------------------
1183

    
1184
# The TAGFILES option can be used to specify one or more tagfiles.
1185
# Optionally an initial location of the external documentation
1186
# can be added for each tagfile. The format of a tag file without
1187
# this location is as follows:
1188
#   TAGFILES = file1 file2 ...
1189
# Adding location for the tag files is done as follows:
1190
#   TAGFILES = file1=loc1 "file2 = loc2" ...
1191
# where "loc1" and "loc2" can be relative or absolute paths or
1192
# URLs. If a location is present for each tag, the installdox tool
1193
# does not have to be run to correct the links.
1194
# Note that each tag file must have a unique name
1195
# (where the name does NOT include the path)
1196
# If a tag file is not located in the directory in which doxygen
1197
# is run, you must also specify the path to the tagfile here.
1198

    
1199
TAGFILES               =
1200

    
1201
# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1202
# a tag file that is based on the input files it reads.
1203

    
1204
GENERATE_TAGFILE       =
1205

    
1206
# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1207
# in the class index. If set to NO only the inherited external classes
1208
# will be listed.
1209

    
1210
ALLEXTERNALS           = NO
1211

    
1212
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1213
# in the modules index. If set to NO, only the current project's groups will
1214
# be listed.
1215

    
1216
EXTERNAL_GROUPS        = YES
1217

    
1218
# The PERL_PATH should be the absolute path and name of the perl script
1219
# interpreter (i.e. the result of `which perl').
1220

    
1221
PERL_PATH              = /usr/bin/perl
1222

    
1223
#---------------------------------------------------------------------------
1224
# Configuration options related to the dot tool
1225
#---------------------------------------------------------------------------
1226

    
1227
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1228
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1229
# or super classes. Setting the tag to NO turns the diagrams off. Note that
1230
# this option is superseded by the HAVE_DOT option below. This is only a
1231
# fallback. It is recommended to install and use dot, since it yields more
1232
# powerful graphs.
1233

    
1234
CLASS_DIAGRAMS         = YES
1235

    
1236
# You can define message sequence charts within doxygen comments using the \msc
1237
# command. Doxygen will then run the mscgen tool (see
1238
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1239
# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1240
# the mscgen tool resides. If left empty the tool is assumed to be found in the
1241
# default search path.
1242

    
1243
MSCGEN_PATH            =
1244

    
1245
# If set to YES, the inheritance and collaboration graphs will hide
1246
# inheritance and usage relations if the target is undocumented
1247
# or is not a class.
1248

    
1249
HIDE_UNDOC_RELATIONS   = YES
1250

    
1251
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1252
# available from the path. This tool is part of Graphviz, a graph visualization
1253
# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1254
# have no effect if this option is set to NO (the default)
1255

    
1256
HAVE_DOT               = NO
1257

    
1258
# By default doxygen will write a font called FreeSans.ttf to the output
1259
# directory and reference it in all dot files that doxygen generates. This
1260
# font does not include all possible unicode characters however, so when you need
1261
# these (or just want a differently looking font) you can specify the font name
1262
# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
1263
# which can be done by putting it in a standard location or by setting the
1264
# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
1265
# containing the font.
1266

    
1267
DOT_FONTNAME           = FreeSans
1268

    
1269
# By default doxygen will tell dot to use the output directory to look for the
1270
# FreeSans.ttf font (which doxygen will put there itself). If you specify a
1271
# different font using DOT_FONTNAME you can set the path where dot
1272
# can find it using this tag.
1273

    
1274
DOT_FONTPATH           =
1275

    
1276
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1277
# will generate a graph for each documented class showing the direct and
1278
# indirect inheritance relations. Setting this tag to YES will force the
1279
# the CLASS_DIAGRAMS tag to NO.
1280

    
1281
CLASS_GRAPH            = YES
1282

    
1283
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1284
# will generate a graph for each documented class showing the direct and
1285
# indirect implementation dependencies (inheritance, containment, and
1286
# class references variables) of the class with other documented classes.
1287

    
1288
COLLABORATION_GRAPH    = YES
1289

    
1290
# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1291
# will generate a graph for groups, showing the direct groups dependencies
1292

    
1293
GROUP_GRAPHS           = YES
1294

    
1295
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1296
# collaboration diagrams in a style similar to the OMG's Unified Modeling
1297
# Language.
1298

    
1299
UML_LOOK               = NO
1300

    
1301
# If set to YES, the inheritance and collaboration graphs will show the
1302
# relations between templates and their instances.
1303

    
1304
TEMPLATE_RELATIONS     = YES
1305

    
1306
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1307
# tags are set to YES then doxygen will generate a graph for each documented
1308
# file showing the direct and indirect include dependencies of the file with
1309
# other documented files.
1310

    
1311
INCLUDE_GRAPH          = YES
1312

    
1313
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1314
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1315
# documented header file showing the documented files that directly or
1316
# indirectly include this file.
1317

    
1318
INCLUDED_BY_GRAPH      = YES
1319

    
1320
# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1321
# doxygen will generate a call dependency graph for every global function
1322
# or class method. Note that enabling this option will significantly increase
1323
# the time of a run. So in most cases it will be better to enable call graphs
1324
# for selected functions only using the \callgraph command.
1325

    
1326
CALL_GRAPH             = NO
1327

    
1328
# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1329
# doxygen will generate a caller dependency graph for every global function
1330
# or class method. Note that enabling this option will significantly increase
1331
# the time of a run. So in most cases it will be better to enable caller
1332
# graphs for selected functions only using the \callergraph command.
1333

    
1334
CALLER_GRAPH           = NO
1335

    
1336
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1337
# will graphical hierarchy of all classes instead of a textual one.
1338

    
1339
GRAPHICAL_HIERARCHY    = YES
1340

    
1341
# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1342
# then doxygen will show the dependencies a directory has on other directories
1343
# in a graphical way. The dependency relations are determined by the #include
1344
# relations between the files in the directories.
1345

    
1346
DIRECTORY_GRAPH        = YES
1347

    
1348
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1349
# generated by dot. Possible values are png, jpg, or gif
1350
# If left blank png will be used.
1351

    
1352
DOT_IMAGE_FORMAT       = png
1353

    
1354
# The tag DOT_PATH can be used to specify the path where the dot tool can be
1355
# found. If left blank, it is assumed the dot tool can be found in the path.
1356

    
1357
DOT_PATH               =
1358

    
1359
# The DOTFILE_DIRS tag can be used to specify one or more directories that
1360
# contain dot files that are included in the documentation (see the
1361
# \dotfile command).
1362

    
1363
DOTFILE_DIRS           =
1364

    
1365
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1366
# nodes that will be shown in the graph. If the number of nodes in a graph
1367
# becomes larger than this value, doxygen will truncate the graph, which is
1368
# visualized by representing a node as a red box. Note that doxygen if the
1369
# number of direct children of the root node in a graph is already larger than
1370
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1371
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1372

    
1373
DOT_GRAPH_MAX_NODES    = 50
1374

    
1375
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1376
# graphs generated by dot. A depth value of 3 means that only nodes reachable
1377
# from the root by following a path via at most 3 edges will be shown. Nodes
1378
# that lay further from the root node will be omitted. Note that setting this
1379
# option to 1 or 2 may greatly reduce the computation time needed for large
1380
# code bases. Also note that the size of a graph can be further restricted by
1381
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1382

    
1383
MAX_DOT_GRAPH_DEPTH    = 0
1384

    
1385
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1386
# background. This is enabled by default, which results in a transparent
1387
# background. Warning: Depending on the platform used, enabling this option
1388
# may lead to badly anti-aliased labels on the edges of a graph (i.e. they
1389
# become hard to read).
1390

    
1391
DOT_TRANSPARENT        = YES
1392

    
1393
# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1394
# files in one run (i.e. multiple -o and -T options on the command line). This
1395
# makes dot run faster, but since only newer versions of dot (>1.8.10)
1396
# support this, this feature is disabled by default.
1397

    
1398
DOT_MULTI_TARGETS      = NO
1399

    
1400
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1401
# generate a legend page explaining the meaning of the various boxes and
1402
# arrows in the dot generated graphs.
1403

    
1404
GENERATE_LEGEND        = YES
1405

    
1406
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1407
# remove the intermediate dot files that are used to generate
1408
# the various graphs.
1409

    
1410
DOT_CLEANUP            = YES
1411

    
1412
#---------------------------------------------------------------------------
1413
# Configuration::additions related to the search engine
1414
#---------------------------------------------------------------------------
1415

    
1416
# The SEARCHENGINE tag specifies whether or not a search engine should be
1417
# used. If set to NO the values of all tags below this one will be ignored.
1418

    
1419
SEARCHENGINE           = NO